fbpx

C profiles

Produkto aprašymas

PRODUCT DESCRIPTION

Height – H:100 – 400 mm
Shelf width – B:C: 48/60/75 mm
Sheet thickness:1.50 / 2.00 / 2.50 / 3.00 / 3.50
OpeningYes
Material:S280 GD, S350 GD and S350 GD + Z275

PRODUCTION PROFILE

PROFILE CthicknessscalesH.BC.
mmkg / mmmmmmm
C 1001.502.641004817
2.003.521004818
2.504.361004818
3.005.231004819
C 1001.502.881006018
2.003.841006019
2.504.761006018
3.005.711006019
C 1501.503.241504817
2.004.321504818
2.505.361504818
3.006.431504819
C 1501.503.601506018
2.004.801506019
2.505.961506018
3.007.151506019
C 2001.503.842004817
2.005.122004818
2.506.362004818
3.007.632004819
C 2001.504.202006021
2.005.602006022
2.506.962006021
3.008.352006022
C 2501.504.502504817
2.006.002504818
2.507.402504818
3.008.882504819
C 2501.504.802506021
2.006.402506022
2.507.962506021
3.009.552506022
C 3001.505.023004817
2.006.693004818
2.508.283004818
3.009.943004819
C 3001.505.333006021
2.007.103006021
2.508.723006021
3.0010.463006022
C 3501.506.2635075twenty
2.008.3535075twenty
2.5010.4035075twenty
3.0012.4835075twenty
C 4002.5011.3240075twenty
3.0013.5840075twenty

OPENING OF SECTIONS

Profiles of “Z” and “C” types enable quick and easy development of industrial or service halls. Connecting them is mainly done with screws. For this purpose, there are three types of openings in the profiles (table 1):

  • AT 14
  • AT 18
  • beans by 19 × 25

Depending on the type of profile used, there are different values ​​for the spacing of technical and assembly holes. Their values ​​are given in the table below.
The figure shows the possibilities of longitudinal punching.
Opening is possible in all planes of the section.

E – dimension from a wide shelf Bg

Arrangement of the holes

  • J – 32 mm
  • H – 100 mm
  • I – 50 mm

 

Z / C profilesheet thicknessE.F.
mmmmmm
Z / C 1001.525.850
22650
2.526.350
326.550
Z / C 1501.525.850
22650
2.526.350
326.550
With 1801.550.880
25180
2.551.380
351.580
Z / C 2001.550.8100
251100
2.551.3100
351.5100
Z / C 2501.550.8150
251150
2.551.3150
351.5150
Z / C 2801.550.8180
251180
2.551.3180
351.5180
Z / C 3001.550.8200
251200
2.551.3200
351.5200
Z / C 3501.550.8250
251250
2.551.3250
351.5250
Z / C 4001.550.8300
251300
2.551.3300
351.5300

TYPES AND ARRANGEMENT OF HOLES

The types and locations of the openings in the Z / C profiles are basically arbitrary and we present them on the example drawings.

TRANSPORT RECOMMENDATIONS

  • In the case of collection by own means of transport, the car should have an open loading platform enabling easy loading and unloading.
  • Galvanized and alluzin profiles must be protected against getting wet!

STORAGE RECOMMENDATIONS

  • Oiling and passivation of galvanized sheets is a protection against white corrosion only during transport.
  • Sections stored in packages may not be stored outdoors or in rooms exposed to moisture and changing temperatures. Zinc and aluzinc coatings, in particular those that have not yet been subjected to the influence of weather conditions, i.e. without a protective zone protecting them, are sensitive to water condensation with limited air access (sheet metal stored in packages). Particular attention should be paid to unloading in winter conditions and storage in heated warehouses. Due to the large temperature difference, water precipitates between the sheets.
  • Metal sheets wet during transport or storage should be dried, then the profiles should be placed with spacers enabling free air circulation. After drying, galvanized (aluzinc) sections should be inspected and covered with a layer of preservative oil.
  • Sheets intended for longer storage should be inspected and then covered with a layer of machine oil – for galvanized and aluzinc sheets.
  • The result of not following the above recommendations is the formation of zinc corrosion relatively quickly (for galvanized and aluzinc sheets it can be only a few days) – i.e. white layers loosely connected to the substrate, which do not protect against corrosion.

COLOR

Metallic coatings
OC - ​​galvanizedOC – ​​galvanized
AZ - aluzincAZ – aluzinc
+


    Pasirinkti failusPrisegti failą

    Užsiprenumeruokite naujienlaiškį
    +
    Gaukite geriausius pasiūlymus, informaciją apie akcijas ir naujienas pirmieji.